Oil return filter
Oil return filter It is located in the return line of the system and is used to capture contaminants generated or intruded in the system before returning to the tank. It is therefore the most effective and important filter for controlling system contamination concentrations. Product introduction The oil return filter is mainly installed on the oil return line of the hydraulic system. Various kinds of dirt such as abrasive grains generated by various hydraulic components during the working process can be intercepted by setting the oil filter of the return oil line to avoid returning to the fuel tank again. It is again sucked by the hydraulic pump. The allowable pressure difference of the oil filter in the return line is in the range of 0.3 to 0.5 MPa depending on the pressure level. The accuracy is determined according to the requirements of the degree of oil contamination. There are more factors to be considered in the setting of the return filter. One of the important fact...
评论
发表评论